400 ml Red, Pink and Yellow Please...
Red, Pink and Yellow
Please choose your requirement from drop down menu.
Fluorescent colours for professional decoration work: Shop window organization, building of fairs, shop mechanisms, external decorations, demo exhibits etc. Been suitable for: Metal, wood, glass, ceramic, Eternit, concrete, stone, paper, cardboard, hard plastic, flowers etc.
Fast and even drying process.
Very good covering power.
Limited light- and weather resistance
Especially consumer-friendly because of durable acryl quality at a high technical level. Tamper-proof cap avoids unauthorized use.
Bonding solvent basis: acryl lacquer with special solvent
Propellants free of CFC
dust dry after approx. 15 min.
touch proof after approx. 30 min.
thoroughly dried after approx. 24 hours
Each can covers approx. 1 m² depending on hue and thickness of the layer
Carefully read and note the instructions on the can before using!
Preparation of the ground:
The underground must be clean, dry, free of rust and grease.
Slightly roughen any old paintings and smooth surfaces with fine sandpaper.
Fluorescent colours have only on white underground their highest luminosity, therefore apply DECO spray white mat as basecoat.
Well shake the can 2 minutes. Spray several thin layers from a distance of approx. 25 cm.
Fluorescent colours can be over-sprayed for the improvement of the light- and weather resistance with DECO clear lacquer.
|1||41,54 TL||41,54 TL|