1. GENERAL DESCRIPTION

Fast motor flush.

A blend of highly active polar and non-polar solvents, paraffinic oil, dispersant and anti-wear

additives.

CRC Motor Flush cleans the engine's interior of sludge, gum, rust and varnish prior to oil

change.

2. FEATURES

• Dissolves deposits from pistons and rings and frees sticky valves and lifters.

• Holds the deposits in suspension until they are drained with the oil.

• Contains anti-wear, anti-corrosion and anti-oxidation additives protecting the engine whilst

flushing it.

• Helps to restore compression.

• Improves performance, fuel economy and engine life.

• Non-acid, non-alkaline and non-corrosive.

• Harmless to all metal parts.

• Can be used in diesel as well as in gasoline engines.

• Compatible with all commonly used types of oil.

3. APPLICATIONS

• Motor bikes

• Cars

• Trucks

• Busses

• Boats

• Farm and garden equipment

• Stationary combustion engines

4. DIRECTIONS

• Shake before use.

• Pour content of can into crankcase, whilst engine is warm.

• Run engine for about 10 minutes at increased idle, 1500 rpm., then switch off and drain out

old oil.

• Replace oil filter, as required.

• Refill with clean engine oil.

• A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC

products.